Mallet vs hammer is quite a confusing topic.
I understand that.
Buckle your seat belt because I am here to solve that puzzle.
They are different.
Yes, you heard it right. They are different in terms of shape and purpose of use. I am going to describe what they are, their use, and some upsides and downsides of both of them.
Later, I will guide you on which one is better for what purpose.
So, let’s take a closer look.
Mallet vs Hammer
A mallet looks almost like a hammer. Someone who doesn’t know mallet exists in this world would not be able to differentiate between these two.
Mallets have the same number of parts – handle and head. However, structurally the shape and the material of the head are the core differences here with a hammer.
The handle of a mallet is mostly made from wood.
On the other hand, the head is made from rubber, copper, plastic, rawhide or wood.
You won’t find any claw, neck, etc like most of the hammers do have. To be exact, the head is big and round-shaped in case of a mallet and flat surface at both the ends of the head.
The head and the handle are attached by wedges, glue or other hardware.
You can use both the end equally for the same purpose.
You will want to use a mallet when you want to put a soft impact and don’t want to leave a mark.
Leveling the dent of metal is one popular use of a mallet. However, it is not limited to that only.
Woodworkers love to drive the chisel with a rubber/wood mallet.
Because they can control the cut properly using a mallet and it doesn’t damage the chisel head like its hammer counterpart.
You can use a mallet for various other tasks too.
Like if you want to break a piece of wood or wooden material like a cricket bat or baseball bat or if you want to put together things to make furniture then a mallet is the best choice for you.
Recommended Best Mallets on Amazon:
- Double-faced solid rubber head delivers a softened positive strike
- High-strength fiberglass handle core helps absorb vibrations
- Exterior poly jacket protects handle core from missed strikes
- Soft, nonslip rubber grip is a directly integrated piece of the handle that can never pull loose
- Made for construction, woodworking, and automotive applications
- Soft faces deliver a solid strike without damaging work surface
- Lightweight tubular steel handle shifts the weight balance toward head for extra power in each blow
- Extra soft, non-slip rubber handle grip for ultimate comfort and control
- Always Guaranteed
- Guaranteed unbreakable
- Quiet yet transmit maximum blow
- Made in USA
Let’s get to know some of the upsides and downsides of a mallet.
- Doesn’t cost too much.
- You can make a wooden mallet on your own.
- Used for different purposes where you want to apply mild/soft force but better result without any scratch or mark.
- You can use both the ends of the head equally to achieve the same result.
- Usually not too heavy.
- Mallet tends to bounce back after you hit the object. Use protective gears to keep you safe from injuries.
Structure wise a hammer is not the same as a mallet.
Typically you will find one end of the hammerhead is like a flat shape and peen/claw or ball at the other end.
The flat surface end is used to hit the object.
You usually use a hammer to strike hard. Hence the material of the head needs to be strong. You will find that steel is used to make the head of a hammer in most of the cases.
What about the handle?
The shape of the handle of a hammer is different than the shape of a mallet.
This time you will find a slender handle, probably with a grip to control the hammer properly.
The length of the handle does matter.
Look, as I said you want to use a hammer to hit hard. So, a longer handle is going to help you in this regard.
What’s the equation?
The longer the handle the greater the amount of force it will be able to produce. You know, the farther it drops the hard it hits.
You will find a wide variety of hammers on the market. Let’s deal with some of the common hammers that we use for the DIY tasks or garden.
- Claw Hammer: I’ve already discussed the shape of this type of hammer. These are the most common ones. It’s called claw hammer since the one end of the head is like a claw. We use this hammer for various purposes including knocking the nails in with the flat surface and also to take it off using the claw end of that hammer if they are not required.
- Break Hammer: This type of hammer is to break the brick mostly.
- Ball Peen Hammer: Here you will see a flat surface at one end and the ball along the other end. This type of hammer is used for hammering and shaping soft metals.
- Warrington hammer/panel pin hammer: This one is used for hammering real small and thin pin-like nails.
- Dead blow hammer: This one doesn’t bounce back after hitting. Used for almost the same purposes as the mallets but here you will be able to hit with greater force than you do with a mallet.
Recommended Best Hammers on Amazon:
- FORGED STEEL HEAD – Maximum strength and durability for a lifetime of hard work
- BALANCE AND TEMPER – The most durable, longest lasting striking tools available
- HEAVY HITTING HAMMER – Perfectly balanced to deliver powerful blows with an easy swing
- FIBERGLASS HANDLE – Lightweight, durable handle offers a comfortable controlled swing with a ribbed grip to prevent slips
- VERSATILITY ON THE JOB – Use with chisels, punches, star drills, hardened nails & more
- Drop forged and heated treated alloy steel head provides maximum striking strength
- Sharpened and curved claw ends generates maximum nail-pulling leverage
- Finely polished finish with rust-preventative clear coating insures durability and longevity
- Built-in magnetic nail holder for easy start with one-handed operation
- Ergonomically designed anti-shock handle offers extra comfort and non-slip gripping
- FORGED IN ONE PIECE – The most durable, longest lasting striking tools available
- RIP CLAW VERSITILITY – Use for pulling nails, prying boards, demolition work, splitting wood and more
- BUILT FOR THE PRO –Framers, roofers, carpenters, contractors, tradesman & serious DIYers
- PATENTED SHOCK REDUCTION GRIP – Comfortable, durable & reduces impact vibration by 70%
- MADE IN THE USA – Our tools are proudly crafted in Rockford, IL using the finest American steel
Let’s deal with some pros and cons of a hammer.
- Provides you a greater force than a mallet.
- Different variations available to serve different purpose.
- Easily available.
- Some hammers are a bit heavy to handle.
- Except for the dead blow hammer, the other ones bounce back after hitting the object. So use protective gear to avoid any possible injuries.
Mallet Vs Hammer – Which One is the Better?
You better decide which one is perfect for you.
I can’t guess what you are looking to do with the tool.
You know the different types and use of these tools. It won’t be a tough task to judge the better option for you anymore.
I hope I was able to wipe out all the confusion between a hammer and a mallet.
So, mallet vs hammer should not remain as a moot point to you anymore.
The last two points that I believe are worth noting. Please wear protective gear like gloves, glasses whenever you work with these tools.
Must use a quality product to get the best result.
Comment below if you have any more confusion or question to ask.
#1. Dead Blow Hammer and Rubber Mallet Difference